Valved Cracker Effusion Cell V-CRC

The valved cracker effusion cell combines the evaporation and cracking of elements like arsenic, phosphor, sulfur, selenium, tellurium, etc. with an integrated valve to reproducibly control and rapidly change the beam flux for more than two orders of magnitude. The valve is located at the orifice and is heated to prevent any condensation of material.

Technical Data:

Type	V-CRC
Heating system	Radiation heating, tantalum wires with PBN insulators
Temperature range	100°C … 800°C bulk zone, 100°C … 1000°C cracker
Temperature stability	≤0.1°C depending on the PID controller
Max. outgas temp.	1200°C effusion cell without crucible, 800°C … 1200°C depending on the crucible, 1200°C cracker
Max. power	220W bulk zone, 180W cracker
Max. current	8A bulk zone, 9A cracker
Integral valve	manual
Bakeout temperature	250°C
Conditioning	Heated to maximum temperature with and without crucible
Shipping	Stainless steel container with valve

Custom:

Flange size	CF40 / CF63 or specified
Max outer diameter	38mm / 61mm or specified
Length	As specified
Thermocouple type	Two independent type C or specified
Crucible material	Ta / quartz
Crucible capacity	80 - 500 cc

Options:

Downward looking version
Motorized shutter
Water cooling

Available Downloads:

Effusion-cell-V-CRC.pdf (81.65 KB)

For further information, please contact
sales(at)createc.de.